Kathy & Jim Sawada Toronto, Canada

EXOTIC WOOD WATCH BOX
Black Walnut

Click here to enlarge this picture

.....

Click buttons to change view. Click main picture to enlarge.  

The interior of this beautiful jewelry box will hold three watches. The eight padded inserts will accomodate a collection of rings and cufflinks. Watch bands, necklaces and bracelets can be stored in and under the removable trays.

The Black Walnut in this watch box has a beautiful grain pattern and deep, rich colours. The dramatic whorls and rays give a three-dimensional celestial efffect to the top. That scene is framed with bands of Black Walnut which are accentuated with Cherry veneer edges.

The trays and dividers in the interior are made from solid Black Walnut.

Notice how the interior of the top is finished as beautifully as the exterior. That takes extra time and material .... but, the result is well worth it.

No stains or dyes have been used. The rich colours that you see are the natural colours of the finished woods.


SPECIFICATIONS

Dimensions:

Overall exterior dimensions are about 12" x 9" x 3 3/4 "  (30.5 x 22.9 x 9.2 cm)

Three 2 1/4" (5.7 cm) deep watch compartments, each about 3 3/4" x 2 1/2" (9.5 x 6.4 cm)

The removable trays are about 7/8" (2.2 cm) deep. One tray has eight 2 1/2" (6.4 cm) wide padded inserts for rings and cufflinks. The other tray has two compartments, each about 7 1/2" by 1 3/8" (7.6 x 5.7 cm).

The  compartments below the trays are about 1" (2.5 cm) deep. Inside dimensions of the compartments are about:-
(one)     3 1/2" x  7 3/4"   (8.9 x  19.7 cm)
(six)      2 1/2 " x 1 1/2  "  ( 6.4  x  3.8 cm)  

Finish:

Interior and exterior are finished with Danish Oil, a penetrating resin. Exterior is further finished with a three-stage wax process, the final stage being carnuba.  The resultant finish is smooth, durable, and appealing.

Woods Used:

Black WalnutCherry

Exterior:

Black Walnut handle.

Mitred corners reinforced with keys of Black Walnut & Cherry

Sides are solid 1/2" (13  mm) thick Black Walnut

 

Top is made from solid woods into an assembly about 1/2" (13 mm) thick. It is then re-sawn into two pieces about 1/8" (3mm) thick which are laminated to both sides of 1/4" (6 mm) plywood. This construction not only makes the interior of the top as attractive as the exterior, but also prevents warping of the top.

 

Interior:

Solid brass quadrant hinges.

Tray sides and dividers are solid Black Walnut.

Interior is lined with a luxurious black faux-velvet. 
Watch pillows are covered in the same material.